Mobile compact cabinets
Mobile compact cabinets are a special storage shelf system, mainly used in archives, libraries, reference rooms and other places, for storing books, documents, materials and other items.
Mobile compact cabinets usually consist of the following parts:
Tracks
Enable the compact cabinet to move left and right on the ground.
Chassis
Laid on the track, connecting the cabinet body and the track, and bearing the weight of the cabinet body.
Column
Supports the entire shelf structure.
Shelf
Used to store items, and the layer spacing can usually be adjusted as needed.
Hand-cranked or electric device
Used to control the movement of the compact cabinet.
Professional design
Is the key to effective use of space.
Mobile compact cabinets are very popular in places where a large amount of storage is required and space is limited due to their efficient space utilization and convenient operability.
The installation of mobile compact cabinets can be roughly divided into three steps
1,Track installation
The installation of mobile compact cabinets first requires laying tracks.
There are two main ways to install tracks: ground tracks and embedded tracks.
ground tracks
The ground rail is laid directly on the ground and then fixed with bolts. It has the advantages of easy installation and easy disassembly.
embedded tracks
The embedded rail is laid below the ground. It is necessary to reserve the rail groove in advance or cut the floor tiles to re-groove. This method is more stable and reliable.
The installation of the rail needs to ensure that the ground is level, the parallelism error between the rails does not exceed 1mm, and the rails are stable and not loose.
Cabinet installation&Door panel installation
Cabinet installation
After the track is installed, the next step is to install the cabinet.
First, install the chassis, then fix the columns to the chassis, and make sure all screws are tightened.
After that, install the side panels, debug the hand crank, install the partitions, hanging panels, top panels and other components.
The installation of these components is relatively simple, because most manufacturers use screwless frame structures and fix them with buckles.
Door panel installation
The installation of door panels is an important step. You need to pay attention to the size of the gap between the door gaps to ensure that the door gaps are tight to prevent dust from entering and damaging the files.
One-stop warehousing equipment solutions in China
Send us an inquiry about warehousing equipment and experience its transformative power for your business or brand. With our professional warehousing equipment solutions, you can enhance your products, attract customers, and open new opportunities for growth and success in the warehousing industry.
Safety and maintenance
When using compact cabinets, you need to pay attention to safety issues.
safety issues
Ensuring that the weight of items stored in the rack does not exceed 600kg, keeping the rack load even, and avoiding uneven load on one side.
regular maintenance and care are required
- keeping the rack clean;
- checking whether the transmission mechanism is normal;
- ensuring that the layer spacing can be freely adjusted, etc.
